How To Perform HP DeskJet 2652 First Time Setup?
HP DeskJet 2652 is a fast, user-friendly, all-in-one printer that allows you to print, scan and copy documents effortlessly. This printer offers you several remarkable features such as a space-saving design, LED screen, and the HP smart app, which enhance the performance of the printer. To enjoy all the features of the HP DeskJet 2652, you need to set up the printer. If you don’t know How to Connect HP Deskjet 2652, don’t worry, as this guide will take you through all the steps required for the setup.
Steps You Need To Follow:
Here are the steps mentioned below, following which you can quickly complete the printer setup:
1. Remove Printer from the Box
1. To begin with, remove the printer from the box for initiating the setup.
2. Now, remove all the packaging materials and the tapes from the printer.
3. Proceed for the setup by lowering the output tray.
4. Reach inside the printer and open the ink cartridge access door.
5. Remove all the tapes and material from inside the printer.
6. Ensure that you have removed all the hardware and material from the box.
After you complete the unpacking, connect the power cord.
2. Install the Ink Cartridges
1. Install the HP ink cartridges and remove one of the ink cartridges from the package and ensure to touch only the black plastic on the ink cartridge.
2. Hold the ink cartridge by its sides and put the ink cartridge into its slot, and then push the ink cartridge until it fits into the place.
3. Now, perform the same steps to install another ink cartridge.
4. After repeating the steps, close the ink cartridge access door and the output tray.
3. Load Paper into the Input tray
1. Load plain A4 paper after installing in the ink cartridges.
2. Next, raise the input tray and slide the paper to the left.
3. Now, load a stack of plain white paper into the input tray and slide the paper width guide to the right so that it rests at the edge of the paper.
4. Now, lower the output tray to pull out the tray extender.
4. Install the printer software
1. To begin the HP Deskjet 2652 Printer setup, ensure that you have the latest version of the HP Deskjet 2652 Driver Install.
2. You can visit HP Support and can perform the HP Deskjet 2652 Driver Download. Make sure that your printer and computer are sharing the same network.
3. Now download the HP Deskjet 2652 Driver Windows 10 printer software from the CD that came along with the printer, or you can also visit the official HP website to download the software.
Follow the on-screen instructions to complete the installation process.
By following the steps mentioned above, you can efficiently complete the HP DeskJet 2652 printer setup. Hope you find the provided steps helpful in performing the setup quickly.
Read Related Blogs: -
