How Can I Set Up HP DeskJet 2600 Printer?
The HP DeskJet 2600 is an outstanding All-in-One Printer with high storage capacity that makes it easy for you to manage printing tasks in a more effective manner. This is a highly affordable and authentic printer that offers you so many features. It also supports wireless printing. To access all the features of HP DeskJet 2600, you have to set up the printer. So, if you want to set up HP DeskJet 2600 but don’t know how to go about it, you are at the right place.
HP DeskJet 2600 Printer Setup:
Here are the steps mentioned below following which complete the printer setup:
1. First of all, make sure that you have stacked the paper in the input tray.
2. Next, you need to install the ink cartridges before you start the wireless connection process.
3. Then, gently remove all the packing outside the printer device.
4. After that, keep the printer device on the flat surface and connect one end of the power cord to the printer’s back end and the other end to the power outlet and switch on your printer device.
5. Next, open the paper input tray and place the load of 10 to 20 sheets of paper and then, you need to adjust the paper width guide so that it gets adjusted with the paper.
6. Gently remove the protective orange tape to get the ink cartridge out of the package.
7. Now, lift open the ink cartridge door and place the ink cartridge in the respective slots.
8. Next, you need to place alignment page at the right front corner of scanner glass.
9. Lastly, press the Start copy black button in order to align the cartridges.
By following the above-mentioned steps, you can easily complete the printer setup.
HP DeskJet 2600 Wireless Setup
If you want to access the wireless printing feature of HP DeskJet 2600, you need to complete the printer’s wireless setup. If you don’t know How To Connect HP Deskjet 2600 Printer to wifi, then here are the steps mentioned below which you can follow to complete the HP DeskJet 2600 wireless setup process:
- First of all, set the printer manually and fill in the ink cartridges.
2. Before you start the installation process, you need to make sure that the computer is connected to the wireless network and the computer and router are turned on. The computer to which the printer is connected to the wireless network. Now, power on the printer, and while setup is going on, place it near the router.
3. Then, you need to complete HP Deskjet 2600 Driver Download, by going to the website, and you can also complete HP Deskjet 2600 Driver Windows 10.
4. Download HP Easy Start. If you are asked to choose the Printer option, then choose My Printer is not shown; after that, you will be shown a list o printer click.
5. Continue and click the Wireless network option.
6. Wi-Fi allows performing printing tasks wirelessly from a computer, Smartphone, or tablet. Turn on the Wi-Fi option from the display panel and go to the Settings option. Turn on the Wi-Fi option using which you can connect up to five devices.
7. In case you want to print from a wireless-capable computer, you can easily do so by turning on the direct Wi-Fi option on the computer and printer, and you are done with the wireless setup.
So, that was all about the HP DeskJet 2600 printer setup. In case you face any problems during the setup process, you can also refer to Hp Deskjet D2600 Manual to get a detailed solution.
Read Related Blogs:-
